Oil & Gas, Chemical & Water Pipelines
PrismaFlow, Prisma’s next-generation smart solution for oil & gas, chemical, and water pipelines, uses its patented Hyper-Scan Fiber-Sensing™ technology enabling ultra-sensitive and intelligent-learning detection to provide real-time intelligence and uniquely reliable monitoring capabilities.
The solution lowers deployment costs by using standard, pre-deployed fiber-optic cables (including cables that were installed within a conduit). These fiber-optic cables – which are part of most modern infrastructures – operate as the system’s “sensors” and enable PrismaFlow to monitor and detect the pipeline from remote locations, providing surveillance and real-time threat detection for up to 100 km of pipeline per PrismaFlow unit or 200 km per dual-unit.
PrismaFlow identifies the acoustic signature of each event at or near the pipeline, at a resolution that allows classification of the events and identification of their location with unprecedented accuracy and dramatically reduces the “noise” of positive and negative false alarms.
Within a distance from the pipeline that you pre-define, PrismaFlow allows smarter, faster pipeline management and prevents accidental, criminal or malicious activity by flagging for classification a range of events that can include:
Mechanical and manual digging
Inline pigging devices
PrismaFlow’s platform is Plug & Play – with zero infrastructure installation, and minimal maintenance.
The platform provides monitoring for up to 100 km per PrismaFlow unit or 200 km per dual-unit. The unit is connected to a single Command & Control (C&C) unit located in the customer’s operating center.
The PrismaFlow unit attaches directly to the customer’s
fiber-optic cable with a simplex SC/APC connector, which connects to a single fiber in the patch panel – ensuring access to a single fiber only, i.e., not compromising the activity or security of any other fibers in the cable. An Internet connection (LAN or WiFi) is required to transmit the monitored data to a C&C unit.
Scaling up involves use of multiple PrismaFlow units, each of which provides coverage for up to 100 km. Each unit is located in a communication room. All of the units combined require a single C&C unit in the customer’s operating center.
There is no need for discrete sensors. Upgrades are software based; no hardware upgrades are required.
Key Features & Benefits
Systems involving thousands of sensors along the pipeline are expensive for deployment, operation, and maintenance. The alternative is fiber sensing – using very long fibers as sensors – which is probably the most cost-effective solution. But before PrismaFlow, existing solutions were ineffective due to high false alarm rates, poor target classification, and limited ability to use pre-deployed optical communication cables as "sensors".
PrismaFlow solves all of all these issues thanks to its revolutionary Hyper-Scan technology, which offers 100x sensitivity improvement over alternative systems.
PrismaFlow has raw data of unparalleled quality. We apply Big Data techniques to data sets that are several orders of magnitude wider, with significantly higher SNR (signal-to-noise ratio) levels – leading to very high detection probability and advanced target classification.
Upgrades to the system are software based - and can be installed remotely.
All Information Consolidated in a Single Location & Single Display
The C&C unit presents the consolidated data of multiple units, with a real-time map and detection table that displays the following information:
Detection of events
Classification of events
Location of events (at a resolution of less than 10 m)
Identification of multiple, simultaneous events without interference or crosstalk